14 - 16 WiNG CLI Reference Guide
14.1.10 no
firewall-policy
Negates a command or sets its default value
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no [alg|clamp|dhcp-offer-convert|dns-snooping|firewall|flow|ip|
ip-mac|logging|proxy-arp|stateful-packet-inspection-l2 |storm-control|tcp|
virtual-defragmentation]
Parameters
Example
rfs7000-37FABE(config-fw-policy-default)#no storm-control arp log
rfs7000-37FABE(config-fw-policy-default)#s
rfs7000-37FABE(config-fw-policy-default)#no dhcp-offer-convert
rfs7000-37FABE(config-fw-policy-default)#
alg Disables alg
clamp Deletes a clamp value
dhcp-offer-convert Disables conversion broadcast DHCP offers to unicast
dns-snoop Disables DNS snooping
firewall Unconfigures the wireless firewall
flow Defines a session flow timeout
ip Configures a selected Internet Protocol (IP) component
ip-mac Defines an action based on the IP-MAC table
logging Disables firewall enhanced logging
proxy-arp Disables generation of ARP responses on behalf of another device
stateful-packet-inspection-l2 Disables stateful packet inspection in a layer2 firewall
storm-control Defines storm-control logging configuration
tcp Disables the TCP protocol
virtual-defragmentation Disables virtual defragmentation
Comments to this Manuals