14 - 14 WiNG CLI Reference Guide
14.1.8 ip-mac
firewall-policy
Defines an action based on the IP MAC table
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
ip-mac [conflict|routing]
ip-mac conflict [drop-only|log-and-drop|log-only]
ip-mac conflict [log-and-drop|log-only] log-level [<0-7>|
alerts|critical|debugging|emergencies|errors|informational|
notifications|warnings]
ip-mac routing conflict [drop-only|log-and-drop|log-only]
ip-mac routing conflict [log-and-drop|log-only] log-level [<0-7>|
alerts|critical|debugging|emergencies|errors|informational|
notifications|warnings]
Parameters
Example
rfs7000-37FABE(config-fw-policy-default)#ip-mac conflict-detection log
rfs7000-37FABE(config-fw-policy-default)#
[conflict|routing]
• conflict – Enables IP Address v. MAC Address conflict detection
• routing – Defines action based on routing table
The following are common for the above:
• drop-only – Drops the packets
• log-and-drop – Logs and drop the packets
• log-only – Logs the packets only
• log-level – Configures the log level for DoS Checks
• <0-7> – Logging severity level
• alerts – Immediate action needed (severity=1)
• critical – Critical conditions (severity=2)
• debugging – Debugging messages (severity=7)
• emergencies – System is unusable (severity=0)
• errors – Error conditions (severity=3)
• informational – Informational messages (severity=6)
• notifications – Normal but significant conditions (severity=5)
• warnings – Warning conditions (severity=4)
Comments to this Manuals