Motorola 2.1 Installation Guide Page 274

  • Download
  • Add to my manuals
  • Print
  • Page
    / 952
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 273
4 - 112 WiNG CLI Reference Guide
4.1.46.2 wlan-mode commands
wlan
Configures WLAN related commands. Manual mapping of WLANs is erased when the actual WLAN is disabled and
enabled immediately.
Use the (config) instance to configure WLAN related parameters.
To navigate to this instance, use the following commands:
rfs7000-37FABE(config)#wlan <WLAN>
Table 4.17 Summarizes wlan-mode commands
Table 4.17 wlan-mode commands
Command Description Reference
802.11k Configures support for 802.11k radio resource
measurement
page 4-114
802.11r Configures support for 802.11r fast BSS
transition
page 4-115
802.11w Enables support for Protected Management
Frame (IEEE 802.11w) settings
page 4-116
accounting Defines the accounting configuration on this
WLAN
page 4-117
acl Defines the actions taken based on an ACL rule
configuration
page 4-118
answer-
broadcast-probes
Allows the WLAN to respond to probes for
broadcast ESS
page 4-119
authentication-
type
Sets the authentication type for the WLAN page 4-120
bridging-mode Configures how packets to/from this WLAN are
bridged
page 4-121
broadcast-dhcp Configures broadcast DHCP packet handling page 4-122
broadcast-ssid Advertises the SSID of the WLAN in beacons page 4-123
captive-portal-
enforcement
Configures the WLAN’s captive-portal
enforcement
page 4-124
client-access Enables WLAN client-access (normal data
operations) on the WLAN
page 4-125
client-client-
communication
Allows the switching of frames from one
wireless client to another on the WLAN
page 4-126
client-load-
balancing
Enables load balancing of the clients on the
specified WLAN
page 4-127
data-rates Specifies the 802.11 rates to be supported on
the WLAN
page 4-128
Page view 273
1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 951 952

Comments to this Manuals

No comments