7 - 14 WiNG CLI Reference Guide
7.1.6.2.1 bridging-mode
bridge-vlan-mode commands
Cofigures how the packets on the selected VLAN are bridged.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
bridging-mode [auto|isolated-tunnel|local|tunnel]
Parameters
Example
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#bridging-mode isolated-
tunnel
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#show context
bridge vlan 1
bridging-mode isolated-tunnel
ip igmp snooping
ip igmp snooping querier
rfs7000-37FABE(config-profile default-rfs7000-bridge-vlan-1)#
auto|isolated-
tunnel|local|tunnel
• auto – Choose bridging mode automatically to match WLAN, vlan,
and bridging-mode configuration
• isolated-tunnel – Bridge packets between local ethernet ports and
any local radios, and pass tunneled packets through without
detunneling them
• local – Bridge packets normally, between the local ethernet ports and
local radios (if any)
• tunnel – Bridge packets between local ethernet ports, any local radios,
and tunnels to other APs and wireless-switches
Comments to this Manuals