PROFILES 7 - 41
7.1.14 dscp-mapping
Creating Profiles
Configures IP DSCP to 802.1p priority mapping for untagged frames
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
dscp-mapping <WORD> priority <0-7>
Parameters
Example
rfs7000-37FABE(config-profile-default-rfs7000)#dscp-mapping 20 priority 7
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
dscp-mapping 20 priority 7
no autoinstall configuration
no autoinstall firmware
crypto isakmp policy default
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
interface me1
interface ge1
ip dhcp trust
qos trust dscp
<WORD> Enter a DSCP value of a received IP packet
priority <0-7> Priority used for the packet if untagged.
• <0-7> – Specifies the 802.1p priority value between 0 and 7
Comments to this Manuals