PROFILES 7 - 75
7.1.22 Interface vlan Instance
Use the (config-profile-default-rfs7000) instance to configure interfaces – Ethernet, VLAN and the tunnel associated with
the controller.
To switch to this mode, use the command:
rfs7000-37FABE(config-profile-default-rfs7000)#interface [<interface-name>|ge <1-4>|
me1|port-channel <1-4>|radio|up1|vlan <1-4094>]
rfs7000-37FABE(config-profile-default-rfs7000)#vlan 8
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#
Table 7.8 Summarizes interface -vlan mode commands
Table 7.8 interface-vlan commands
Commands Description Reference
crypto Defines the encryption module page 7-76
description Defines the VLAN description page 7-77
dhcp-relay-
incoming
Allows an on-board DHCP server to
respond to relayed DHCP packets on
this interface
page 7-78
ip Configures Internet Protocol (IP)
config commands
page 7-79
no Negates a command or sets its
default
page 7-80
shutdown Shuts down the selected interface page 7-81
use Defines the settings used with this
command
page 7-82
Comments to this Manuals