13 - 28 WiNG CLI Reference Guide
13.1.5.4 dns-server
static-binding-mode
Sets the DNS server’s IP address available to all DHCP clients connected to the pool. Use the no dns-server
command to remove the DNS server list.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
dns-server <A.B.C.D>
Parameters
Usage Guidelines
For DHCP clients, the DNS server’s IP address maps the host name to an IP address. DHCP clients use the
DNS server’s IP address based in the order (sequence) configured.
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1))#dns-server
172.16.10.7
rfs7000-37FABE(config-dhcp-net-pool-test)#
<A.B.C.D> Specify a static IP address to configure a DNS server. Up to 8 IPs can be
set.
Comments to this Manuals