7 - 128 WiNG CLI Reference Guide
7.2.12 override-wlan
Device Specific Commands
Configures RF Domain level overrides for a WLAN
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP7131
xx
• AP650
• AP6511
• AP6532
Syntax
override-wlan WLAN [ssid <WORD>|vlan-pool <1-4094> {limit} <0-8192>|
wpa-wpa2-psk <WORD>]
Parameters
Example
rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#override-wlan test vlan-pool 8 limit
9
rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#commit
rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#show context
rfs7000 00-15-70-37-FA-BE
use profile default-rfs7000
use rf-domain default
hostname rfs7000-37FABE
override-wlan test vlan-pool 8 limit 9
mac-name 11-22-33-44-55-66 testrfs7000
interface me1
interface ge1
switchport mode access
switchport access vlan 1
interface ge2
interface ge3
interface ge4
interface vlan1
ip address 172.16.10.2/24
rfs7000-37FABE(config-device-00-15-70-37-FA-BE)#
WLAN [ssid <WORD>|vlan-
pool <1-4094>|wpa-wpa2-psk
<WORD>]
Enter the name of the WLAN to be configured
• ssid <WORD> – Configures the SSID for this WLAN
• <WORD> – Specifies a case-sensitive alphanumeric SSID
• vlan-pool <1-4094> {limit} – Configures a pool of VLANs for the
WLAN
• <1-4094> – Specifies a VLAN ID between 1 and 4094
• {limit <0-8192>} – Specifies a value between 0 and 8192 to
limit the number of users on this VLAN
• wpa-wpa2-psk <WORD> – Configures the WPA-WPA2 key or
passphrase for the WLAN
Comments to this Manuals