PROFILES 7 - 53
7.1.19.2 no
nat-pool
Negates a comamnd or sets its default value
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no address
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with
the command getting negated.
Example
rfs7000-37FABE(config-profile-default-rfs7000-nat-pool-pool1)#no address
Comments to this Manuals