DHCP-SERVER-POLICY 13 - 9
13.1.3.4 default-router
dhcp-pool-mode
Configures a default-router or gateway IP address for the network pool. To remove the default router list, use
the no default-router command.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
default-router <A.B.C.D> {<A.B.C.D>}
Parameters
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#default-router
172.16.10.8 172.16.10.9
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
<A.B.C.D> {<A.B.C.D>} Specifies the default router IP address for the network pool. The
maximum number of IP’s that can be configured is 8.
Comments to this Manuals