AAA-POLICY 8 - 9
server <1-6> [dscp|host|
nac|nai-routing|onboard|proxy-
mode|retry-timeout-factor <50-
200>|time-out]
Configures an authentication server
• <1-6> [dscp|host|nac|nai-routing|onboard|proxy-mode|retry-timeout-
factor <50-200>|time-out] – Selects a server to be configured
• dscp <0-63> – Specifies a differentiated devices code point value
(QoS) to be used in generated RADIUS packets
• <0-63> – Configures a DSCP value between 0 and 3
• host <WORD> – Defines the address of the server
• <WORD> secret – Enter the IP address or hostname of the
server
• secret [0 <WORD>|2 <WORD>|<WORD>] {port} <1-65535> –
Configures the RADIUS server shared secret
• 0 <WORD> – Enter a clear text secret
• 2 <WORD> – Enter an encrypted text secret
• <WORD> {port} – Enter the shared secret
• {port} <1-65535> – Configures the authentication port
• <1-65535> – Enter the UDP port used for authentication. The
default port is 1812.
• nac – Uses the server for devices requiring network access
control
• nai-routing realm-type – Configures network access identifier
based forwarding of requests
• realm-type [prefix|suffix] – Select the match type made on the
username
• prefix realm <WORD> {strip} – Matches the prefix of the
username
• suffix realm <WORD> {strip} – Matches the suffix of the
username
The following parameters are common for both prefix and suffix:
• realm <WORD> – Enter the text to be matched against the username
• <WORD> {strip} – Enter the match text including the delimiter if
applicable
• {strip} – Strips the realm from the username before forwarding
the request to the RADIUS server
Comments to this Manuals