GLOBAL CONFIGURATION COMMANDS 4 - 135
4.1.46.2.20kerberos
wlan-mode commands
Configures Kerberos authentication parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
kerberos [password|realm <WORD>|server]
kerberos password [0 <LINE>|2 <LINE>|<LINE>]
kerberos server [primary|secondary|timeout]
kerberos server primary host <IP> {port} <1-65535>
kerberos server secondary host <IP> {port} <1-65535>
kerberos server timeout <1-60>
Parameters
Example
rfs7000-37FABE(config-wlan-1)#kerberos server timeout 12
rfs7000-37FABE(config-wlan-1)#
rfs7000-37FABE(config-wlan-1)#kerberos server primary host 172.16.10.9 port 88
rfs7000-37FABE(config-wlan-1)#show context
wlan 1
ssid WLAN_USECASE_01
vlan 2
bridging-mode tunnel
encryption-type none
authentication-type none
kerberos server timeout 12
kerberos server primary host 172.16.10.9
[password|realm|server
• password [0|2|<LINE>] – Creates a KDC server password (up to 127
characters)
• 0 <LINE> – Enter the password
• 2 <LINE> – Enter the password in encrypted form
• <LINE> – The password
• realm <WORD> – Defines a KDC realm (up to 127 characters)
• server [primary|secondary|timeout] – Modifies KDC server parameters
• primary host <IP> {port <1-65535>} – Defines the primary KDC server
• secondary host <IP> {port <1-65535>} – Defines the secondary KDC
server
• host – Enter the address of the KDC server
• <IP> {port <1-65535>} – Sets the KDC server IP address
• port <1-65535> – Optional. Sets the KDC server authentication
port in the range 1 to 65535. The default value is 88
• timeout <1-60> – Modifies the KDC server‘s timeout parameters
• <1-60> – Defines the time the controller waits for a response from
the KDC server before retrying
Comments to this Manuals