7 - 90 WiNG CLI Reference Guide
7.1.29 logging
Creating Profiles
Modifies message logging facilities
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
logging [aggregation-time <1-60>|buffered|console|facility|
forward|host||on|syslog]
logging [buffered|console|syslog] [<0-7>|alerts|
critical|debugging|emergencies|errors|informational|
notifications|warnings]
logging facility [local0|local1|local2|local3|
local4|local5|local6|local7]
logging host <IP>
logging forward on
Parameters
aggregation-time
<1-60>
Sets the number of seconds for aggregating repeated messages. The
value can be configured between 1-60 seconds.
buffered [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the buffered logging level
• <0-7> – Enter the logging severity level (0-7)
• alerts – Set the immediate action needed, (severity=1)
• critical – Critical conditions, (severity=2)
• debugging – Debugging messages, (severity=7)
• emergencies – System is unusable, (severity=0)
• errors – Error conditions, (severity=3)
• informational – Informational messages, (severity=6)
• notifications – Normal but significant conditions, (severity=5)
• warnings – Warning conditions, (severity=4)
console [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the console logging level
forward on Forwards system debug messages to controller or cluster members
• on – Enables forwarding debug messages
Comments to this Manuals