USER EXEC MODE COMMANDS 2 - 9
Parameters
Example
rfs7000-37FABE>clear crypto isakmp sa 111.222.333.01 on rfs7000-37FABE
arp-cache {on <DEVICE--
NAME>}
Clears ARP cache entries.
• on <DEVICE-NAME> – Optional. Clears the arp cache on a selected AP
or Controller
• <DEVICE-NAME> – An AP or a Controller name
[cdp|lldp] neighbors {on
<DEVICE-NAME>}
Clears Cisco Discovery Protocol (CDP) or Link Layer Discovery Protocol
(LLDP) neighbor table entries
• neighbors – Clears CDP neighbor table
• on <DEVICE-NAME> – Optional. Clears the CDP/LLDP neighbor
table entries on a selected AP or Controller
• <DEVICE-NAME> – An AP or a Controller name
crypto [ipsec|isakmp] sa
[<IP>|all] {on <DEVICE-
NAME>}
Clears the encryption module’s databases.
• ipsec sa – Clears IPSEC security associations.
• isakmp sa – Clears ISAKMP security associations.
The following are common for the above:
• <IP> – Clears the IPSec or ISAKMP security associations for a certain
Peer.
• all – Clears the IPSec or ISAKMP
security associations for all Peers.
• on <DEVICE-NAME> – Optional. Clears the SAs on a selected AP
or Controller
• <DEVICE-NAME> – An AP or a Controller name
event-history Clears event history
ip dhcp bindings [<IP|all] {on
<DEVICE-NAME>}
Clears the DHCP address bindings.
• on <DEVICE-NAME> – Optional. Clears the CDP/LLDP neighbor
table entries on a selected AP or Controller
• <DEVICE-NAME> – An AP or a Controller name
spanning-tree detected-
protocols {interface
{<INTERFACE>|ge <1-
8>|me1|port-channel <1-
4>|vlan <1-4094>} {on
<DEVICE-NAME>}
Clears the spanning-tree protocols configured for the interface
• detected-protocols {interface [<INTERFACE>|ge <1-8>|me1|port-
channel <1-4>|vlan <1-4094>]} {on} – Enter the interface name to clear
the detected spanning tree protocols for that specific interface
• <INTERFACE> – Clears selected interface name
• ge < 1-8> – Clears the configured GigabitEthernet interface status
• me1 – Clears the FastEthernet interface status
• port-channel <1-4> – Clears port-channel information on AP/Control-
ler
• vlan <1-4094> – Clears the configured vlan information
• wwan1 – Clears Wireless WAN interface information
The following are common for the above
• on <DEVICE-NAME> – Optional. Clears the CDP/LLDP neighbor
table entries on a selected AP or Controller
• <DEVICE-NAME> – An AP or a Controller name
Comments to this Manuals