DHCP-SERVER-POLICY 13 - 7
13.1.3.2 bootfile
dhcp-pool-mode
Assigns a bootfile name for the DHCP configuration in the network pool
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
bootfile <WORD>
Parameters
Usage Guidelines
Use the bootfile command to specify the boot image. The boot file contains the boot image name used for
booting the bootp clients (DHCP clients). Only one boot file is allowed per pool.
Use
{no} bootfile command to remove the bootfile. Do not use the <file name> with the bootfile command
as only one bootfile exists per pool. The command
[no]bootfile removes the existing command from the
pool.
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#bootfile test.txt
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
<WORD> Sets the boot image for BOOTP clients. The file name can contain letters,
numbers, dots and hyphens. Consecutive dots and hyphens are not
permitted
Comments to this Manuals