GLOBAL CONFIGURATION COMMANDS 4 - 29
4.1.10 clear
Global Configuration Commands
Clears parameters, cache entries, table entries, and other similar entries. The clear command is only available for specific
commands. The information cleared using this command varies depending on the mode where the clear command is
executed.
In this mode, the clear command is used to clear the event history.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
clear event-history
Parameters
Example
rfs7000-37FABE(config)#clear event-history
rfs7000-37FABE(config)#
event-history Clears the event history
Comments to this Manuals