Motorola 2.1 Installation Guide Page 444

  • Download
  • Add to my manuals
  • Print
  • Page
    / 952
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 443
7 - 6 WiNG CLI Reference Guide
7.1.2 arp
Creating Profiles
Configures the address resolution protocol parameters.
Supported in the following platforms:
RFS7000
RFS6000
RFS4000
AP71xx
AP650
AP6511
AP6532
Syntax
arp [<IP>|timeout
arp <IP> <MAC> arpa [<L3-INTERFACE-NAME>|vlan <VLAN>] {[dhcp-server|router]}
arp timeout <TIME>
Parameters
Example
rfs7000-37FABE(config-profile-default-rfs7000)#arp timeout 2000
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
arp timeout 2000
no autoinstall configuration
no autoinstall firmware
crypto isakmp policy default
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
interface me1
interface ge1
ip dhcp trust
qos trust dscp
qos trust 802.1p
rfs7000-37FABE(config-profile-default-rfs7000)#arp 172.16.10.10 45-bc-22-38-16-3F
arpa vlan 3 dhcp-server
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
arp 172.16.10.10 45-bc-22-38-16-3F arpa vlan3 dhcp-server
arp timeout 2000
no autoinstall configuration
<IP> <MAC> arpa [<L3-
INTERFACE-NAME>|vlan
<VLAN>] {[dhcp-
server|router]}
Configures a static ARP entry for a given IPv4 IP address.
<IP> – The static IP adderss to configure the ARP entry for
<MAC> – The MAC address to be associated with the IP and SVI
arpa – The type of ARP.
<L3-INTERFACE-NAME> – Sets the router interface name
vlan <VLAN> – Sets a switch vlan interface where <VLAN> is the
SVI interface name.
dhcp-server – Optional. Sets the ARP entry for a dhcp-server
router – Optional. Sets the ARP entry for a router.
timeout <TIME> Sets the ARP timeout value.
<TIME> – Sets the ARP entry timeout value in seconds. Enter a value
in the range 15-86400 seconds.
Page view 443
1 2 ... 439 440 441 442 443 444 445 446 447 448 449 ... 951 952

Comments to this Manuals

No comments