4 - 144 WiNG CLI Reference Guide
4.1.46.2.28vlan
wlan-mode commands
Sets the VLAN assignment of the WLAN
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
vlan <1-4094>
Parameters
Example
rfs7000-37FABE(config-wlan-wlan1)#vlan 4
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#show interface vlan 4
Interface vlan4 is UP
Hardware-type: vlan, Mode: Layer 3, Address: 00-15-70-37-FA-BE
Index: 5, Metric: 1, MTU: 1500
IP-Address: 157.235.208.252/24
input packets 0, bytes 0, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 0, bytes 0, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
rfs7000-37FABE(config-wlan-wlan1)#
<1-4094> Sets the WLAN’s VLAN. This command starts a new VLAN assignment for
a WLAN index. All prior VLAN settings are erased.
Comments to this Manuals