7 - 100 WiNG CLI Reference Guide
7.1.36 no
Creating Profiles
Negates a command or sets its default value
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no [aaa|arp|autoinstall|ap-upgrade|automatic-write|bridge|cdp|
cluster|controller|controller-group|crypto|domain-lookup
|dscp-mapping|events|hb-holdtime|hb-interval|interface|ip|
legacy-auto-update|logging|local|mac-address-table|mint|name-server|
ntppreferred-controller-group||radius|rf-domain-manager|spanning-tree|use|
wep-shared-key-auth|service]
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with
the command getting negated
Example
rfs7000-37FABE(config-profile-default-rfs7000)#no cluster
rfs7000-37FABE(config-profile-default-rfs7000)#
Comments to this Manuals