Motorola PTP 500 User's Guide Page 373

  • Download
  • Add to my manuals
  • Print
  • Page
    / 447
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 372
PTP 300 and PTP 500 Series User Guide Web-based management
phn-1115_006v000
Sep 2010
7-13
Attribute Meaning
Region Code The region code is used by the system to constrain the
wireless to operate within regulatory regime of the particular
country. The region code is encoded in the product license
key. If the operator wishes to change region code, a new
license key must be obtained from Motorola or the local point-
to-point distributor or system integrator.
Elapsed Time
Indicator
The elapsed time indicator attribute presents the total time in
years, days, hours, minutes and seconds since the last system
restart. The system can restart for several reasons, for
example commanded reboot from the system reboot web
page, or a power cycle of the equipment.
Ethernet Link
Status
This indicates the current status of the Ethernet link. A state
of ‘Up’ with a green background indicates that an Ethernet
link is established. A state of ‘Down’ with a red background
indicates that the Ethernet link is not established.
Ethernet Speed
and Duplex
The negotiated speed and duplex setting of the Ethernet
interface. The speed setting is specified in Mbps.
Full Duplex data transmission means that data can be
transmitted in both directions on a signal carrier at the same
time. For example, on a local area network with a technology
that has full duplex transmission; one workstation can be
sending data on the line while another workstation is
receiving data.
Half Duplex data transmission means that data can be
transmitted in both directions on a signal carrier, but not at
the same time. For example, on a local area network using a
technology that has half duplex transmission, one workstation
can send data on the line and then immediately receive data
on the line from the same direction in which data was just
transmitted.
Remote IP Address Hyperlink to the other side of the Link. The IP address of the
peer link is displayed if the Link is UP, otherwise
‘unavailable’ is displayed.
Page view 372
1 2 ... 368 369 370 371 372 373 374 375 376 377 378 ... 446 447

Comments to this Manuals

No comments