Motorola PTP 500 User's Guide Page 301

  • Download
  • Add to my manuals
  • Print
  • Page
    / 447
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 300
PTP 300 and PTP 500 Series User Guide Task 5: Upgrading software version
phn-1115_006v000
Sep 2010
6-19
Upgrading to a new software version
Before performing a software upgrade, save the configuration as described in Saving
the system configuration on page 6-18.
To upgr
ade to a new software version, proceed as follows:
Procedure 6-11 Upgrade software version
1
Go to http://www.motorola.com/ptp/support
and find Point-to-Point software
updates. Download and save the required software image (for example
PTP500-04-01.DLD2).
2
Select menu option System, Software Upgrade. The Software Upgrade
page is displayed (Figure 6-15).
3
Select Browse. Navigate to the folder containing the downloaded software
image and select Open.
4
Select Upload Software Image. The Software Upgrade Confirmation page
is displayed (Figure 6-16).
5
Select Program Software Image into Non-Volatile Memory. The
Progress Tracker page is displayed (Figure 6-17).
CAUTION
The upgrade process should not be interrupted, as this can result in a
corrupt main software image, which will result in the recovery image
being booted at the next reset cycle.
6
On completion, the Software Upgrade Complete page is displayed (Figure
6-18).
Select Reboot W
ireless Unit and select OK to confirm. The unit begins the
reboot process.
7
The reboot process will take up to 120 seconds. During this time it will not
be possible to communicate with the unit. After the reboot, check that the
required software image is loaded and running.
NOTE
If communication with the unit is not restored after 120 seconds , this could
indicate a problem with the memory update process. If this happens, enter
Recovery Mode as described in Using recovery mode on
page 7-53.
Page view 300
1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 446 447

Comments to this Manuals

No comments