Task 13: Connecting link to the network Chapter 6 Configuration and alignment
phn-1115_006v000
6-58
Sep 2010
Table 6-9 Manual clock attributes
Attribute Meaning
SNTP State ‘Disabled’ means that the unit will keep time without
connecting to a networked time server.
Set Time Set hours, minutes and seconds.
Set Date Set year, month and day.
Time Zone Set the time zone offset from Greenwich Mean Time (GMT).
Daylight Saving ‘Disabled’ means that daylight saving adjustments will not be
applied to the time. ‘Enabled’ means that daylight saving
adjustments will be applied, according to local rules.
Setting the real-time clock to synchronize using SNTP
To set the clock to synchronize with a networked time server, proceed as follows:
Procedure 6-20 Set the real-time clock using SNTP
1
Select menu option Management, Time. The Time Configuration page is
displayed.
2
Set the SNTP State attribute to Enabled. The SNTP clock attributes are
displayed (Figure 6-38).
3
Review and update the SNTP clock attributes (Table 6-10).
4
Select Submit Updated Configuration.
Comments to this Manuals