Motorola DSR-4530 Instruction Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
DSR-4530 1
1
Introducing the DSR-4530
The Motorola DSR-4530 (Phase 2) is a commercial Integrated Receiver Decoder (IRD) designed
for cable operators and other commercial satellite operations. After properly setting up the DSR-
4530, it can receive authorization and control information from the satellite operator.
Key Features
A variable front-end allows the DSR-4530 to be used in either full or partial transponder mode.
Manual tuning for either ASI input or eight L-band inputs (ports).
Demodulates DigiCipher
®
II signals.
Operational modes include: DCII-MAN, DVB-MAN, 8PSK-TC, and 8PSK-DVBS2.
Modulation settings will vary depending on the units’s Operational Mode setting.
The user is able to select an RF input (L-band) frequency of 950 to 2150 MHz. The user can
select any of the following code rates: 5/11, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, and 7/8.
The DSR-4530 is capable of storing multiple Virtual Channel Tables (VCTs) and Network
Information Tables (NITs). One VCT may be selected at a time.
Once the IRD has acquired an MPEG signal, the user can select a program from a list of
programs as defined in the Program Association Table (PAT).
Two video outputs. One for primary video and one for OSD video. Outputs either 525-line
NTSC/PAL M or 625-line PAL video formats, automatically matching based on the
programmer's input format. (No conversion is done between 525-line and 625-line video.)
VBI reinsertion on lines 10-22 supports data services such as North American Broadcast
Teletext, SID/AMOL I and II, and Closed Caption.
Page view 6
1 2 3 4 5 6 7 8 ... 92

Comments to this Manuals

No comments