Motorola DSR-4530 Instruction Manual download pdf (Page 35)

DSR-4530 29

Operating the DSR-4530

Press any arrow button (

3456

) to back out of the field and leave it unchanged.

Otherwise, press the ENTER button to proceed. The following message displays

Core Menu

The Core menu allows the user to change the front panel LCD contrast.

Press the

buttons until the Core menu appears (shown below).

Contrast Field Default: 18

To adjust the LCD contrast, press the

button until the cursor is at the Contrast

label, and press the ENTER button to move into the field. Use the arrow buttons

(

3456

) to select a value between 1 and 30, with 1 representing the least

contrast and 30 the most. Adjust the contrast so that the LCD panel can be read

clearly. Press the ENTER button to confirm the selection.

TSID Field Default: 0000

Note: The Transport Stream ID (TSID) field is not supported at this time.

The TSID field (range 0000 to FFFF) is a hexadecimal number to identify the

Transport Stream. The TSID value applies when the symbol rate is 4.88 Msps or

less, then the unit uses this value during manual tune to acquire the correct signal.

Press E to continue or to stop

Power Cycle reset in progress. . .

E 18

Core Contrast TSID(hex)

Not

Supported

1 ... 34 35 36 ... 92

No comments

Motorola DSR-4530 Instruction Manual Page 35