Motorola DSR-4530 Instruction Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
3
20
Symbol/Code/Format Field Default: Mode-Dependant
Note: This field is not available when the DCII-Auto option in the Mode field is
selected.
The Symbol field (in Msps) defines the symbol rate at which the unit attempts
acquisition when the selection for acquisition mode is either DCII-MAN, 8PSK-TC
or 8PSK-DVBS2, or DVB-MAN. The Code field defines the forward error
correction (FEC) coding using an internal Viterbi decoder for convolutional code
rates. The Format field defines the waveform modulation format (i.e., QPSK,
OQPSK, etc.) associated with the selected modulation mode.
The Format The Symbol/Code/Format field has the following options, depending
upon the Mode field selection.
Symbol Rate Options:
DCII-MAN: 3.25, 4.88, 7.32, 9.76, 11.71, 14.63, 19.51 (default), and 29.27
8PSK-TC or 8PSK-DVBS2: Range 01.000000 (default) to 30.000000
DVB-MAN: Range 00.000000 (default) to 99.999999
Code Options (for all modulation modes): 5/11, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, and 7/8
Format Options: DCII-QPSK, DCII-OQPSK, DVB-QPSK, and 8PSK
Press the
4
button until the cursor is at the Symbol label, and press the ENTER
button to move into the menu. Press the
56
buttons to display the options. Using
the
56
buttons, scroll through the various Symbol/Code/Format combinations and
select the required combination by pressing the ENTER button to return to top menu.
Port Menu
Note: This menu is not available when the ASI In option is selected. That option is
described in "Manual Tune Menu" (described on page 16).
The Port menu is available when the Manual Tune input setting is one of the
L-band ports (RF Input) as described in the "Manual Tune Menu" (described on
page 16).
In order to use virtual channels, one or more ports must be associated with a
particular satellite and polarity. These menus allow the user to associate the satellite
and polarity with L-band Port 1 through Port 8. Press the
56
buttons until the
Port menu appears (shown below).
E 1 Auto --- ---
PORT ID Mode Satellite Polar
Page view 25
1 ... 25 26 27 ... 92

Comments to this Manuals

No comments