Motorola DSR-4530 Instruction Manual download pdf (Page 34)

Reset Menu

The Reset menu allows the user to reset the unit to the factory default settings or

perform a power cycle. Press the

buttons until the Reset menu appears (shown

below).

Reset Type Field Default: No

Press the

button until the cursor is at the Reset Type label, and press the ENTER

button to move into the field. Press the

buttons to display the two options:

Factory Defaults, and Power Cycle, which are explained below.

Factory Defaults Option

Caution: Selecting this reset option deletes all defined setups and downloaded

information. This operation interrupts service output, so use it carefully.

The Factory Defaults option allows the user to reset the system to the programming

values originally set by the factory firmware. When the option is shown, press the

ENTER button and a caution message is displayed:

Press any arrow button (

3456

) to back out of the field and leave it unchanged.

Otherwise, press the ENTER button to proceed.

During factory reset, the following message is displayed:

Power Cycle Option

The Power Cycle option reboots the DSR-4530 without losing internal user setup

information or downloaded network information. When the option is shown, press

the ENTER button and a caution message appears indicating that the current

service will be interrupted if the action proceeds.

E No

RESET Reset Type

Press E to continue or to stop

CAUTION: IRD memory will be reset

Press E to continue or to stop

Factory Default reset in progress. . .

Press E to continue or to stop

CAUTION: Reset will interrupt service

1 ... 33 34 35 ... 92

No comments

Motorola DSR-4530 Instruction Manual Page 34