Motorola DSR-4530 Instruction Manual download pdf (Page 52)

GigE Subnet Mask Menu

Use the following procedure to set and view the GigE Subnet address (range:

000.000.000.000 to 255.255.255.255) for the upper Ethernet port on the back panel

of the DSR-4530. The GigE subnet mask is represented in the common dotted-

decimal format. Contact the network administrator for details about configuring the

GigE port for operation on your local network.

Press the

buttons until the GigE Subnet Mask menu appears (shown below).

Press the

button until the cursor is at the Subnet Mask label, and press the

ENTER button to move into the field. Use the

buttons to select the digit to

change and then, while the cursor is on that digit, press the

buttons to display

the desired value. Repeat this process for each applicable digit to be changed.

Press the ENTER button to confirm the selection and exit the field.

GigE Default Gateway Menu

Use the following procedure to set and view the GigE Default Gateway address

(range: 000.000.000.000 to 255.255.255.255) for the upper Ethernet port on the

back panel of the DSR-4530. The GigE Default Gateway is an address that is

represented in the common dotted-decimal format. Contact the network

administrator for details about configuring the GigE port for operation on your

local network.

Press the

buttons until the GigE Default Gateway Address menu appears

(shown below).

Press the

button until the cursor is at the Default Gateway label, and press the

ENTER button to move into the field. Use the

buttons to select the digit to

change and then, while the cursor is on that digit, press the

buttons to display

the desired value. Repeat this process for each applicable digit to be changed.

Press the ENTER button to confirm the selection and exit the field.

E 255.255.255.000

PORT GigE Subnet Mask

E 192.168.000.001

PORT GigE Default Gateway

1 ... 51 52 53 ... 92

No comments

Motorola DSR-4530 Instruction Manual Page 52