3
54
Clear Cntrs Field
Note: If a diagnostic menu other than Off is selected, the Clear Cntrs (clear
counters) field also appears. This field is primarily for use with hotline
troubleshooting, and it is recommended that it be used only when directed. Using this
field does not affect receiver operation, but it may give misleading troubleshooting
results if not used properly.
This field allows the user to reset selected counters to zero. To clear counters, press
the
4
button until the cursor is at the Cntrs label, and press the ENTER button to
reset the counters to zero.
Unit Address Menu
This menu is for display only and displays the DSR-4530’s 16-digit electronic
address (range: 000-00000-00000-000 to 999-99999-99999-999). The program
provider uses this address to identify a specific DSR-4530 for authorization and to
retune messages. The display enables the user to view the address from the front
panel rather than reading the label on the back panel.
Press the
56
buttons until the Unit Address menu appears (shown below).
TV Pass Card Menu
The DSR-4530 does not initially require a TV Pass Card, but if one is required, the
program provider typically supplies one. The program provider uses the TV Pass
Card address and decoder address to identify a specific DSR-4530 for authorization
messages.
Press the
56
buttons until the TV Pass Card menu appears (shown below).
The display enables the user to view the TV Pass Card address from the front panel
of the DSR-4530. There are three Status field options:
• Not Inserted
• xxx-xxxxx-xxxxx-xxx (a unique TV Pass Card address, range: 000-00000-
00000-000 to 999-99999-99999-999)
• xxx-xxxxx-xxxxx-xxx Needs Mating.
E 000-12345-12345-678
UNIT ADDRESS
E Not Inserted
TV PASS CARD Status
Comments to this Manuals