3
44
Press the ENTER button to confirm the selection and exit the field.
Subnet Mask Menu
Use the following procedure to set and view the Subnet Mask IP address (range:
000.000.000.000 to 255.255.255.255) for the lower Ethernet port on the back panel
of the DSR-4530. The subnet mask is represented in the common dotted-decimal
format. Contact the network administrator for details about configuring the
Ethernet port for operation on your local network.
Press the
56
buttons until the Subnet Mask menu appears (shown below).
To change the Subnet Mask, press the
4
button until the cursor is at the Subnet
Mask label, and press the ENTER button to move into the field. Use the
34
buttons to select the digit to change and then, while the cursor is on that digit, press
the
56
buttons to display the desired value. Repeat this process for each
applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
IP Gateway Menu
Use the following procedure to set and view the IP Gateway address (range:
000.000.000.000 to 255.255.255.255) for the lower Ethernet port on the back panel
of the DSR-4530. The IP Gateway is an address that is represented in the common
dotted-decimal format. Contact the network administrator for details about
configuring the Ethernet port for operation on your local network.
Press the
56
buttons until the IP Gateway menu appears (shown below).
To change the IP Gateway, press the
4
button until the cursor is at the Default
Gateway label, and press the ENTER button to move into the field. Use the
34
buttons to select the digit to change and then, while the cursor is on that digit, press
the
56
buttons to display the desired value. Repeat this process for each
applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
E 255.255.255.000
PORT 10/100 Subnet Mask
E 192.168.000.001
PORT 10/100 Default Gateway
Comments to this Manuals