Motorola DSR-4530 Instruction Manual download pdf (Page 32)

Trigger Field Default: Auto

The Trigger field allows the user to select the trigger condition to activate an alarm on

the IRD. When the alarm is activated, the Alarm LED illuminates and the alarm relay

indicates an alarm condition. The alarm can be activated for any of the following

conditions:

• The DSR-4530’s tuner loses lock when the input is RF.

• The DSR-4530 cannot lock to the ASI input when the input is ASI.

• The DSR-4530 is unable to render video.

• The DSR-4530 is not authorized to access the selected service.

• The DSR-4530 loses power.

Press the

button until the cursor is at the Trigger label, and press the ENTER

button to move into the field. Press the

buttons to display the five options:

• Disabled: Disables any trigger for an IRD alarm.

• Auto: Enables all triggers for an IRD alarm.

• No Signal: Alarm is triggered when the IRD loses the incoming signal.

• No Video: Alarm is triggered when the IRD loses video input.

• No Auth (Authorization): Alarm is triggered when the IRD is not authorized to

access a selected service.

Press the ENTER button to select the option shown and exit the field.

Bypass Field Default: Alarm

Press the 4 button until the cursor is at the Bypass label, and press the ENTER

button to move into the field. Press the

buttons to display the options:

• If Bypass is selected, the Bypass mode is activated and the DSR-4530 loops

through the auxiliary video and audio inputs regardless of DigiCipher II system

service authorization status. The Bypass LED on the front panel is always lit

when the DSR-4530 is in the bypass state.

• If Disabled is selected, the DSR-4530 ignores the auxiliary inputs for video and

audio and attempts to output the satellite data, regardless of authorization

status.

• If Alarm is selected, the DSR-4530 automatically switches to the bypassed state

if it enters the alarm condition. At such time, the Aux Video and Audio inputs

are routed to the IRD output, and the front panel Bypass LED is lit. When the

DSR-4530 exits the alarm condition, the unit switches back to satellite video

and audio.

Press the ENTER button to select the option shown and exit the field.

1 ... 31 32 33 ... 92

No comments

Motorola DSR-4530 Instruction Manual Page 32