21-18 Motorola Solutions RFS7000GR Series RF Switch, CLI Reference Guide
21.1.13 switch
RTLS Config Commands
Use this command to configure the switch’s geographical location.
Syntax
switch [coordinates|geo-coordinates]
switch coordinates [x <0-65535>] [y <0-65535>] {z <0-65535>}
switch geo-coordinates [longitude <-180.00-80.00>] [latitude <-90.00-90.00>]
Parameters
Example
RFSwitch(config-rtls)#switch coordinates x 121 y 121 z 135
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#switch geo-coordinates longitude 120 latitude 70
RFSwitch(config-rtls)#
coordinates
[x <0-65535>
y <0-65535>]
{z <0-65535>}
Configures following switch coordinates within the site:
• x <0-65535> – Configures X coordinate
• y <0-65535> – Configures Y coordinate
• z <0-65535> – Optional. Configures Z coordinate
[longitude
<-180.00-80.00>]
[latitude
<-90.00 - 90.00>]
Configures following switch geographic coordinates:
• longitude <-180.00-180.00> – Configures the switch’s longitude in
degrees.
• latitude <-90.00-90.00> – Configures switch’s latitude., in degrees.
Comments to this Manuals