Interface Instance 12-13
12.1.10 management
Interface Config commands
Use this command to configure the selected interface as the management interface. It can only be used on a VLANx
interface. The tftp/ftp server, which provides the switch its config file at startup, must be accessible via this interface.
VLAN 1 is the default management interface for the RFS7000 switch.
Syntax
management
Parameters
None
Usage Guidelines
Management privilege can be set only on a L3 interface. Use this command along with the
(config) management
secure
in config mode. This ensures switch management access is restricted to the management VLAN only.
Refer management on page 5-52 for
(config) management secure
configuration.
Example
RFS7000(config)#interface vlan 1000
RFS7000(config-if)#management
RFS7000(config-if)#
Comments to this Manuals