Motorola 2.1 User Manual Page 219

  • Download
  • Add to my manuals
  • Print
  • Page
    / 713
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 218
5-14 Motorola Solutions RFS7000GR Series RF Switch, CLI Reference Guide
5.1.5 arp
Global Configuration Commands
Use this command to map an IP address to a MAC address recognized on the managed network. The Address Resolution
Protocol (ARP) enables mapping of IP to MAC addresses. This conversion is possible in both directions.
Syntax
arp [<IFNAME>|ge <1-4>|me1|sa <1-4>|vlan <1-4094>] [<IP-ADDRESS>] [MAC-ADDRESS]
Parameters
Example
RFS7000(config)#arp TestIF ?
A.B.C.D Internet Protocol (IP)
RFS7000(config)#arp TestIF 1.2.3.4 ?
AA-BB-CC-DD-EE-FF MAC Address
RFS7000(config)#arp TestIF 1.2.3.4 11-22-33-44-55 ?
<cr>
<IFNAME> The interface name
ge <1-4> The GigabitEthernet interface. There are a maximum of four GigabitEthernet
interfaces. Select the interface index between 1 - 4.
me1 The FastEthernet interface
sa <1-4> The StaticAggregate interface. There are a maximum of four StaticAggregate
interfaces. Select the interface index between 1 - 4.
vlan <1-4094> The VLAN switch interface. Select the VLAN interface index between 1 - 4094.
<IP-ADDRESS> This parameter is common to all of the above interface types.
Specify the IP address to be mapped with a specified MAC address.
<MAC-ADDRESS> This parameter is common to all of the above interface types.
Specify the MAC address to be mapped with a IP address specified by the
<IP-ADDRESS> parameter.
Page view 218
1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 712 713

Comments to this Manuals

No comments