20-82 Motorola Solutions RFS7000GR Series RF Switch, CLI Reference Guide
20.1.48 test
Wireless Configuration Commands
Use this command to test neighbor report on air.
Syntax
test dot11k [make-bcn-rep|send-beacon-req|send-nbr-rep]
test dot11k make-bcdn-rep [mu <MAC-ADDRESS>] [neighbor <MAC-ADDRESS>]
test dot11k send-beacon-request [<1-8192>|MU <LIST>|mu <MAC-ADDRESS>]
{measurement-duration <100-10000>}
test dot11k send-nbr-rep [mu <MAC-ADDRESS>]
Parameters
Example
RFS7000(config-wireless)#test dot11k send-nbr-rep mu 11-22-33-44-55-66
% Error: MU is not present
RFS7000(config-wireless)#
dot11k Invokes dot11k related commands.
make-bcn-rep
[mu <MAC-ADDRES>]
[neighbor
<MAC-ADDRESS>]
Makes beacon report
• mu <MAC-ADDRESS> – Specifies the MU’s MAC address in the
AA-BB-CC-DD-EE-FF format.
• neighbor <MAC-ADDRESS> – Specifies the neighboring radio’s MAC
address in the AA-BB-CC-DD-EE-FF format.
send-beacon-request
[<1-8192>|
MU <LIST>|
mu <MAC-ADDRESS>]
Triggers the beacon request send action.
• <1-8192> – Specifies a single MU index.
• MU <LIST> – Specifies a list (for example, 1,3,7) or a range (for example,
1-7) of MU indices.
• mu <MAC-ADDRESS> – Specifies MU’s MAC address.
• measurement-duration <100-10000> – Optional. Specifies measurement
duration in TUs between 100 - 10000.
send-nbr-req
[mu <MAC-ADDRES>]
Triggers the neighbor report send action.
• mu <MAC-ADDRESS> – Specifies the MU’s MAC address in the
AA-BB-CC-DD-EE-FF format.
Comments to this Manuals