20-76 Motorola Solutions RFS7000GR Series RF Switch, CLI Reference Guide
dot11i enforce
[pmkid-validation]
Modifies dot11i service parameters.
• enforce – Modifies enforcement of various dot11i validations.
• pmkid-validation – Toggles PMKID validation in dot11i handshake
message from client.
enhanced-beacon-table
[channel-set|enable|
erase-report|max-ap|
scan-interval|scan-time]
Configures enhanced beacon table for AP locationing.
• channel-set – Sets channel set for enhanced beacon table. The options are:
• a <1-200> – Adds channels to channel set for enhanced beacon table for
802.11a radios.
• an <1-200> – Adds channels to channel set for enhanced beacon table for
802.11an radios.
• /jointfilesconvert/436396/bg <1-200> – Adds channels to channel set for enhanced beacon table for
802.11/jointfilesconvert/436396/bg radios.
• /jointfilesconvert/436396/bgn <1-200> – Adds channels to channel set for enhanced beacon table for
802.11/jointfilesconvert/436396/bgn radios.
• <1-200 > – List of space separated channel number(s) between 1 -
200.
• enable – Enables enhanced beacon table for AP locationing.
• erase-report – Erases the enhanced beacon table for AP locationing report.
• max-ap <0-512> – Sets the maximum number of APs in the enhanced beacon
table for AP locationing.
• scan-interval <10-60> – Sets the time duration, in seconds, between two
enhanced beacon table for AP locationing scans.scan-time <100-1000> – Sets
the time duration, in milliseconds, of an enhanced beacon table scan.
enhanced-probe-table
[enable|erase-report|
max-mu|preferred|
window-time]
Configures enhanced probed table for MU locationing.
• enable – Enables enhanced probe table for MU locationing.
• erase-report – Erases the enhanced probe table for MU locationing report.
• max-mu <0-512> – Maximum number of MUs in the report
• preffered <XX-XX-XX-XX-XX-XX> – Adds the given MAC address to the
preferred MU list. Specify the MAC address in AA-BB-CC-DD-EE-FF format.
• window-time <10-60> – Sets the window time, in seconds, for probe
collection.
forward-eap-to-wired
Forwards EAP packets from a MU to the wired side for the wired switch to
perform 802.1x authentication.
Note: Does not apply for EAP frames directed to the BSS for wireless
802.1x EAP Authentication.
free-packet-watermark
<0-100>
Sets the free packets threshold.The watermark percentage range is <0-100>.
If the percentage of free packets is lower than this number, additional packets
will not be queued up in the datapath.
Comments to this Manuals