Motorola 2.1 User Manual Page 554

  • Download
  • Add to my manuals
  • Print
  • Page
    / 713
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 553
RADIUS Server Instance 19-33
19.1.13 proxy
RADIUS Configuration Commands
Use this command to configure a proxy RADIUS server based on the realm/suffix. A user’s request is forwarded to the
proxy RADIUS server if it cannot be authenticated by the local RADIUS resources. The proxy server checks the
information in the user access request and either accepts or rejects it. If the request is accepted, the proxy server returns
configuration information specifying the type of connection service required to authenticate the user.
Syntax
proxy [realm|retry-count|retry-delay]
proxy [relam <WORD>] [server <IP-Address>] [secret [0 <WORD>|2 <WORD>|<WORD>]]
Parameters
Usage Guidelines
Only five RADIUS proxy server’s can be configured. The proxy server attempts six retries before it times out. The retry
count defines the number of times the switch transmits each RADIUS request to the server before giving up. The timeout
value defines the duration for which the switch waits for a reply to a RADIUS request before retransmitting the request.
Example
RFS7000(config-radsrv)#proxy realm Test server 10.10.10.1 secret "Very Very Secret !!!"
RFS7000(config-radsrv)#
RFS7000(config-radsrv)#proxy retry-count 5
RFS7000(config-radsrv)#
RFS7000(config-radsrv)#proxy retry-delay 8
RFS7000(config-radsrv)#
proxy (realm)
realm <WORD> Configures the realm name (is a string of up to 50 characters).
server <IP-ADDRESS> Sets the proxy server’s IP address.
secret [0 <WORD>|
2 <WORD>|<WORD>]
Configures the server’s shared secret.
0 <WORD> – Password is specified UNENCRYPTED.
2 <WORD> – Password is encrypted with password-encryption secret.
<WORD> – The proxy server shared secret up to 32 characters.
proxy (retry-count)
retry-count <3-6> Configures the proxy server’s retry count value. This value defines the number
of retries sent to the proxy server before giving up the request (the default is 3)
proxy (retry-delay)
retry-delay <5-10> Configures the proxy server’s retry delay time (in seconds). This is the interval
the wireless controller’s RADIUS server waits before making an additional
connection attempt (the default is 5 seconds)
Page view 553
1 2 ... 549 550 551 552 553 554 555 556 557 558 559 ... 712 713

Comments to this Manuals

No comments