5-48 Motorola Solutions RFS7000GR Series RF Switch, CLI Reference Guide
Example
RFS7000(config)#logging aggregation-time 20
RFS7000(config)#
facility Syslog facility in which log messages are sent
• local0 – Syslog facility local0
• local1 – Syslog facility local1
• local2 – Syslog facility local2
• local3 – Syslog facility local3
• local4 – Syslog facility local4
• local5 – Syslog facility local5
• local6 – Syslog facility local6
• local7 – Syslog facility local7
host <A.B.C.D> Configures the remote host to receive log messages
• <A.B.C.D> – Enter remote host's IP address.
monitor Sets the terminal line logging level
• <0-7> – Logging severity level
• alerts – Immediate action needed, (severity=1)
• critical – Critical conditions, (severity=2)
• debugging – Debugging messages, (severity=7)emergencies – System is
unusable, (severity=0)
• errors – Error conditions, (severity=3)
• informational – Informational messages, (severity=6)
• notifications – Normal but significant conditions, (severity=5)
• warnings – Warning conditions, (severity=4)
on Enables the logging of system messages
snmp-set Enables logging of SNMP set request
syslog Sets the syslog servers logging level
• <0-7> – Logging severity level
• alerts – Immediate action needed, (severity=1)
• critical – Critical conditions, (severity=2)
• debugging – Debugging messages, (severity=7)
• emergencies – System is unusable, (severity=0)
• errors – Error conditions, (severity=3)
• informational – Informational messages, (severity=6)
• notifications – Normal but significant conditions, (severity=5)
• warnings – Warning conditions, (severity=4)
Comments to this Manuals