Advanced Features
English
34
Changing the Current Site
Procedure:
1 Press the programmed Site Search button (it could be short
press or long press based on the configuration of the
programmable button).
2 A tone sounds and the display momentarily shows Scanning
site.
3 When the radio finds a new site, it returns to the Home
screen.
Utilities
Setting the Squelch Level
NOTE: This is a conventional only feature.
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
Press the programmed Squelch button to toggle squelch level
between normal and tight.
OR
Follow the procedure below.
1 S to access the menu.
2 Por Q to Utilities and press N to select.
3 Por Q to Radio Settings and press N to select.
4 Por Q to Squelch and press N to select.
5 Choose either Tight or Normal and press N to select.
6 Screen returns to the previous menu.
Setting the Power Level
You can customize your radio’s power setting to high or low for
each channel.
Settings: High enables communication with radios located at a
considerable distance from you. Low enables communication
with radios in closer proximity.
NAG_LACR.book Page 34 Thursday, November 12, 2009 10:17 AM
Comments to this Manuals