Motorola MBP10 User Manual download pdf

MOTOROLA

USER’S GUIDE

MBP10

DIGITAL BABY MONITOR

Welcome...

to your new Motorola Digital Baby Monitor!

Thank you for purchasing the MBP10. This baby monitor uses digitai

communication which ensures that you can hear your baby clearly

without any distracting noise or interference.

Please retain your original dated sales receipt for your records. For

warranty service of your Motorola product, you will need to provide a

copy of your dated sales receipt to confirm warranty status.

Registration is not required for warranty coverage.

For product related questions, please call:

0845 218 0890 in the UK

(65) 68412668 in Singapore

On the Web:

www.motoroia.com

Overview of your Parent unit

Overview of your Baby unit

This User’s Guide provides you with all the information you need to

get the most from your product.

Before you can use the baby monitor, you’ll need to insert and fully

charge the batteries on the Parent unit. Please read the Safety

Instructions in section 1 “Safety Instructions” before you install the

units.

Got everything?

1 X Parent unit

1 X Baby unit

2 X AAA Rechargeable batteries for the Parent unit

1 X Power adapter for the Parent unit

1 X Power adapter for the Baby unit

The features described in this user’s guide are subject to

modifications without prior notice.

Link indicator LED

Volume down

button

Power On/Off

button @

Speaker

Volume up

button "¿0

Power (ON / ga'

LED

Volume indicator

LEDs

Power adapter

connector

12. Power LED

13. Power On/Off

button

14. Microphone

15. Paging button

16. Power adapter

connector

Table of contents

Safety Instructions

..................................................................

Getting started

........................................................................

2.1 Baby unit power supply

..................................................................

2.2 Parent unit battery installation........................................................7

2.3 Parent unit power supply................................................................9

2.4 Link..................................................................................................9

2.5 Registration...................................................................................10

2.6 Paging...........................................................................................10

Using the WIBP10

................................................................

3.1 Volume adjustment on the Parent unit

..........................................

Disposal of the device (environment)

....................................

Cleaning................................................................................11

Help.......................................................................................12

General Information

..............................................................

i. Safety Instructions

WARNING

This baby monitor is compliant with all relevant standards regarding

electromagnetic fields and is, when handled as described in the User’s

Guide, safe to use. Therefore, always read the instructions in this User’s

Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children

when assembling.

• This product is not a toy. Do not allow children to play with it.

• This baby monitor is not a substitute for responsible adult

supervision.

• Keep this User’s Guide for future reference.

• Do not place the baby unit or cables in the cot or within arm's reach of

the baby (the unit should be at least 1 metre away).

• Keep the cords out of reach of children.

• Do not cover the baby monitor with a towel or blanket.

• Never use extension cords with power adapters. Only use the power

adapters provided.

• Test the baby monitor before use. Become familiar with its functions.

• Do not use the baby monitor near water.

• Do not install the baby monitor near a heat source.

• Only use the chargers and power adapters provided. Do not use

other chargers or power adapters as this may damage the device and

batteries.

• Only insert batteries of the same type. Never use ordinary, non-

rechargeable batteries in the parent unit. Insert batteries with the

right polarity (indicated in the battery compartment).

• Do not touch the charger or plug contacts with sharp or metal objects.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions.

2. Getting started

2.1 Baby unit power supply

1. Connect the small plug of the power adapter to the power connector

on the baby unit and the other end of the adapter to the mains

socket (230V/50HZ).

NOTE

Only use the enclosed power adapter (6V DC/300mA).

2. Press The Power LED will illuminate.

3. Press and hold to switch off the baby unit.

2.2 Parent unit battery instaiiation

The Parent unit can be used with either rechargeable batteries (2 AAA

size, Ni-MH type supplied) or from the mains power via the power

adapter supplied.

WARNING

Never use ordinary, non-rechargeable batteries. The power mains

adapter provides a charging function, and non-rechargeable batteries

may burst and cause damage!

NOTE

The Ni-MH rechargeable batteries must be charged for 15 hours before

using the Parent unit without the mains power.

We recommend the rechargeable batteries are installed, so that the unit

continues to work in the event of a mains power failure.

1. Using a screwdriver, turn the screw of the battery cover on the back

of the parent unit 90 degrees in a counterclockwise direction.

Remove the battery cover.

NOTE

Rotate the belt clip to its hanging position to make it easier to access the

battery compartment.

Do not try to turn the screw further than the OPEN position marked on the cover.

2. Install 2 AAA size Ni-MH rechargeable batteries with the polarity as

shown in the diagram above, and by the "+” and markings in the

battery compartment.

3. Close the battery compartment and turn the screw 90 degrees back

in a clockwise direction.

4. Press @. The Power (ON / LED will illuminate green if it

only has battery power.

5. Press and hold @ to switch off the parent unit.

NOTE

When the battery level is low, the green power LED will flash and the

parent unit will emit a warning beep once every minute. If the baby unit

loses power or goes out of range, the link will be lost and the parent unit

will emit a warning beep every 3 seconds and the green link LED on the

parent unit will continue to flash.

WARNING

Do not mix old batteries with new ones.

Keep batteries away from small children.

Do not short-circuit batteries or dispose of in fire.

Remove the batteries if this device is not going to be used for a long

period of time.

1 2

Welcome 1
Binatone 2

Summary of Contents

Page 1 - Welcome

MOTOROLAMOTOROLAUSER’S GUIDEMBP10DIGITAL BABY MONITORWelcome...to your new Motorola Digital Baby Monitor!Thank you for purchasing the MBP10. This baby

Page 2 - Binatone

2.3 Parent unit power supply1. Connect the small plug of the poweradapter to the power connector on the parent unit and the other end of the adapter

Comments to this Manuals

No comments

Motorola MBP10 User Manual

Browse online or download User Manual for Radio Stations Motorola MBP10. Motorola MBP10 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Radio Stations Motorola MBP10