Motorola MOTOTRBO XPR 4580 User Manual download pdf (Page 27)

Receiving and Making Calls

English

No traffic is heard on trunked channels while Status Calls is

selected. If the radio detects no Status Call activity for six

seconds, an alert tone sounds until you press Home or the PTT

button.

Using the Dynamic Regrouping Feature

This feature allows the dispatcher to temporarily reassign

selected radios to a single special channel so they can

communicate with each other. This feature is typically used

during special operations and is enabled by a qualified radio

technician.

You will not notice whether your radio has this feature enabled

until a dynamic regrouping command is sent by the dispatcher.

NOTE: If you try to access a zone or channel that has been

reserved by the dispatcher as a dynamically regrouped

mode for other users, an invalid tone sounds.

Procedure:

1 When your radio is dynamically regrouped, it automatically

switches to the dynamically regrouped channel. A “gurgle”

tone sounds and the display shows the dynamically

regrouped channel name.

2 Press the PTT button to talk. Release PTT button to listen.

When the dispatcher cancels dynamic regrouping, the radio

automatically returns to the zone and channel that you were

using before the radio was dynamically regrouped.

Talkaround

NOTE: This is a conventional only feature.

You can continue to communicate when your repeater is not

operating, or when your radio is out of the repeater’s range but

within talking range of other radios. This is called “talkaround”.

Procedure:

Press the programmed Repeater/Talkaround button to toggle

between talkaround and repeater modes.

Follow the procedure below.

1 S to access the menu.

2 Por Q to Utilities and press N to select.

3 Por Q to Radio Settings and press N to select.

4 Por Q to Talkaround and press N to select.



NAG_LACR.book Page 17 Thursday, November 12, 2009 10:17 AM

1 ... 26 27 28 ... 60

No comments

Motorola MOTOTRBO XPR 4580 User Manual Page 27