Motorola MOTOTRBO XPR 4580 User Manual download pdf (Page 41)

Advanced Features

English

If your radio is set to Silent, it will not have any audio or visual

indicators related to the Emergency feature, or receive any

response from the target radio, until the programmed hot mic

transmission period is over, and you press the PTT button.

If your radio is set to Silent with Voice, it will not have any audio

or visual indicators related to the Emergency feature when you

are making the call with hot mic, or when the target radio

responds after the programmed hot mic transmission period is

over. The indicators will only appear when you press the PTT

button.

NOTE: If the Emergency Alarm request fails, the radio returns

to the Home screen.

Reinitiating an Emergency Mode

There are two instances where this can happen:

• You change the channel while the radio is in Emergency

mode. This exits the Emergency mode. If Emergency Alarm is

enabled on this new channel, the radio reinitiates Emergency.

If Emergency is not supported on this new channel, the radio

displays No Emergency.

• You press the programmed Emergency button during an

Emergency initiation/transmission state. This causes the

radio to exit this state, and to reinitiate Emergency.

Exiting Emergency Mode

Your radio exits Emergency mode when one of the following

occurs:

• Emergency Alarm acknowledgment is received

(for Emergency Alarm only), OR

• All retries to send the alarm have been exhausted

(for Emergency Alarm only), OR

• The programmed Emergency button is long pressed.

NOTE: If your radio is powered off, it exits the Emergency

mode. The radio will not reinitiate the Emergency

mode automatically when it is turned on again.



NAG_LACR.book Page 31 Thursday, November 12, 2009 10:17 AM

1 ... 40 41 42 ... 60

No comments

Motorola MOTOTRBO XPR 4580 User Manual Page 41