Motorola MICOM-2RS User's Guide download pdf (Page 54)

Read/Write Radio Configuration

7-2 68P02953C05

7.1.2. READ DEVICE IN TECHNICIAN MODE

The user working in Technician mode (see Preferences Setting), is able to load radio and technician

parameters (power calibration, oscillator calibration, ECN list modification and serial number

modification) from the radio and, program the radio using the serial communication interface. The user

working mode is displayed on the Status line.

Following selection of Read Device command from the File menu, the Read Device dialog is opened,

providing the capability to select which parameters to load. You may select only one of the listed items

or both.

Figure 7-2. Read Device Dialog Box

After making the selection and pressing the OK button, the window displayed in Figure 7-3 appears.

The bar advancing from left to right indicates the computer attempts to load parameters from the radio.

You may stop this process at any moment by clicking the Abort button.

Figure 7-3. Communication Progress Window

A prompt for unsaved parameters may appear before any attempt to load parameters from the radio. If

there is no response from the radio, or the communication parameters are not compatible (like baud

rate) a communication failure message appears.

Select this item to load radio

parameters.

Select this item to load technician parameters

to operate additional utilities such as: power

calibration, oscillator calibration, ECN list

modification and serial number modification.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 100 101

No comments

Motorola MICOM-2RS User's Guide Page 54