Motorola MICOM-2RS User's Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 101
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
68P02953C05 2-1
CHAPTER 2. GETTING STARTED
2.1. HOW THIS MANUAL IS ORGANIZED
This section, GETTING STARTED, describes the installation of MICOM-2 Radio Service Software,
connecting the radio to your computer and a short guide of Windows fundamentals.
To help you use the RSS efficiently, this manual is organized by tasks, beginning with setting the user
level, creating new configuration files, reading and programming the radio and setting the radio
parameters configuration. The operation of each of the RSS screens is described in detail. A description
of each data field is also given.
Many of the skills described in this manual are also covered in the on-line Help. You may install and
start the RSS as described in this manual, then choose the command from the Help menu and follow
the directions on the screen.
2.2. HOW TO INSTALL THE SOFTWARE
The Radio Service Software is shipped to you on 3½ and 5¼ inch diskettes. To set it up on a hard disk,
follow the procedure given below:
1. Insert the RSS Install diskette (disk 1) in drive A or B, and close the drive door.
2. When Windows is running, close any open application.
3. From the File menu in Program Manager, choose Run (Alt, F, R).
4. Type a:setup (b:setup) and then press ENTER.
5. Follow instructions on the screen.
2.3. HOW TO CONNECT THE RADIO TO YOUR COMPUTER
Connect the “Radio” side of the programming cable to the MIC/PROGRAMMING port on the radio
front panel. Connect the “Computer” side to the PC serial port. Use a D25-to-D9 adapter if required.
2.4. BEFORE YOU BEGIN YOUR WORK WITH THE RSS
You can use the keyboard or the mouse to carry out any action in the RSS. If you are not familiar with
using the mouse or keyboard, or with choosing commands in Windows, read the following
information.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 100 101

Comments to this Manuals

No comments