Motorola MICOM-2RS User's Guide download pdf (Page 44)

Preferences Setting

5-2 68P02953C05

5.3. COMM PORTS

The Comm Ports command customizes the PC serial communication parameters by selecting the

communication port and baud rate.

To perform this operation:

• From the Preferences menu, choose Comm Ports (ALT, P, P)

• Click the

Comm Ports button on the toolbar.

The Communication Ports dialog is then opened, providing the capability to select the PC baud rate and

communication port.

Figure 5-3. Communication Ports Dialog Box

NOTE

Selecting

a baud rate different from the radio’s baud rate may cause

communication failure. To view the radio baud rate, select

Configuration|Options from the View/Change menu, or view the

Radio Configuration Summary window.

The following parameters are configured in the Communication Ports dialog box.

Parameter Enables to

Baud Rate Select one out of four serial communication baud rates, measured in bits per

second (bps).

Comm Port Select Com1

for communication serial port number 1 or Com2 for

communication serial port number 2. If one or both communication ports are

previously utilized, for example by a mouse, the port will be disabled (grayed)

and it will not be used to program the radio.

Select one out of four listed baud rates.

Select the communication serial port.

Click to test radio-PC communication using the

selected communication port and baud rate.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 100 101

No comments

Motorola MICOM-2RS User's Guide Page 44