Motorola M3097 Service Manual Page 61

  • Download
  • Add to my manuals
  • Print
  • Page
    / 133
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 60
Motorola Confidential Proprietary
TDMA M3090/M3097Test Procedures
50
TX Power Measurements
DIGITAL MEASUREMENTS
DTC Meas
Trig Type
2X Frame
Traffic Chan
333
Slot
DVCC
1
To Scre en
CALL CNTL
CALL CNFG
ANLG MEAS
SPEC ANL
DIG MEAS
More
Avg Power
Amplitude
-50.0
dBm
1
Average Power
dBm
24.1898
TX Pwr Det
CW Mode
Figure 36. Digital Measurements Screen
Digital TX Power Out Test Procedure
1 Make sure the Test Set is in Active
mode.
2 Select DIG MEAS from the To
Screen.
3 Select the DTC Meas field. This
shows the To Screen with a list of
available tests.
4 Select AVG Power.
5 Traffic Chan should be set to 333.
6 Put the mobile into test mode.
7 Make Digital TX Power Out measure
ments.
PCS Mode Handset Commands:
1 Enter 575# (Digital signaling mode)
2 11333# (Loads synthesizer Channel)
3 Display prompt Y(enter time slot)
4 Display prompt Y(enter band, 0 =
800, 1 = 1900)
5 Set power level to step 2 (122#)
6 Turn on transmitt carrier (05#)
1900MHz Digital TX power step 2 specification is:
25.0 dBm - 27.0 dBm minus cable loss.
You can also use Digital Call processing to
make these measurements.
TX Power Measurements
Page view 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 132 133

Comments to this Manuals

No comments