Motorola M3097 Service Manual download pdf (Page 36)

Motorola Confidential Proprietary

25

Introduction

The Number Assignment Module (NAM) is

a section of memory that retains information

about the phone’s characteristics, such as the

assigned telephone number, system identifi-

cation number, and options information.

Two methods are available to program the

NAM using the keypad: Test Mode and User

Mode.

Regardless of the method used, the NAM

must be programmed before the phone can

be placed into service. This chapter covers

the NAM Programming steps for Test Mode

NAM Programming.

Entering Test Mode NAM

Programming

The recommended Manual Test Mode setup

for NAM programming phones are described

in “Entering Manual Test Mode” on page 33.

Refer to “Test Connections” on page 38to see

the recommended test setup for performing

Servicing Level manual tests.

The phone is in Status Display mode after

powering up in Manual Test mode. To enter

NAM Programming mode, first press the #

key for at least two seconds to suspend the

Status Display. Then enter 5 5 #. The phone

will now be in Step 1 of the NAM.

NAM Programming Steps

There are 19 steps in the NAM. For each step,

the display shows factory default NAM data.

When new data is entered via the keypad the

display scrolls from left to right.

Use the * key to sequentially step through

the NAM data fields, entering new data as

required, or skipping past factory default

values for parameters that do not need to be

changed.

Table 7, “Minimum Required Test Mode

NAM Programming Steps”, shows the mini-

mum required Test Mode NAM programming

steps. The programming steps not listed in

this table can be “stepped through”, retain-

ing the factory default values for those steps.

Table 8, “Test Mode NAM Programming Se-

quence,” on page 3 lists all NAM program-

ming steps, complete with parameters and

definitions.

Service Type

Minimum

Required

Programming

Single NAM

Dual NAM Enable

Dual NAM

1, 3, 4, 6, 9

11

1, 3, 4, 6

Table 7. Minimum Required

Programming Steps

TDMA Test Mode

NAM Programming

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 132 133

Comments to this Manuals

No comments