Motorola M3097 Service Manual download pdf (Page 39)

Motorola Confidential Proprietary

TDMA M3090/3097TDMA Test Mode NAM Programming

Table 8: Test Mode NAM Programming Sequence (con’t)

07 000000

Security code.

A 6 digit number supplied by the user. This number is used

by the user to access or change “security” features such as the 3-digit unlock

code or the service level.

08 123

Unlock code.

A 3 digit number supplied by the user. If the lock feature is

enabled by the user, the phone can be operated only by individuals who

know the unlock code.

09 4

Service level.

This 3 digit number supplied by the user allows various call

placement restrictions if desired. 004 = no restrictions.

00000100

(B7-B0)

B OPTION BYTE

The display for step 10 represents the status of eight

options, B7 through B0. B7 (msb) is programmed first followed by B6-B0.

Bits enter display on the right and scroll left.

Bit not used (Bit B7).

Enter 0.

Bit not used (Bit B6).

Enter 0.

Bit not used (Bit B5).

Enter 0.

Bit not used (Bit B4).

Enter 0.

Single System Scan (Bit B3).

If set to 1, phone will scan only one system

based on the setting of the preferred system bit (option bit A6). 1 =

enabled, 0 = disabled.

Auto Recall (Bit B2).

When set to one, the user may access repertory by a

one or two digit send sequence (speed dialing).

Disable Service Levels (Bit B1).

If set to 1, the service level (call

restrictions) cannot be changed by the user.

Lock Disable (Bit B0).

When set to 1, the user cannot lock and unlock the

phone unit via the 3 digit lock code.

00001000

(C7-C0)

C OPTION BYTE

The display for step 11 represents the status of eight

options, C7 through C0. C7 (msb) is programmed first followed by C6-C0.

Bits enter display on the right and scroll left.

User Mode NAM Programming Disable (Bit C7).

When set to 1, User

Mode NAM programming cannot be accessed.

Second Number Registration (Bit C6).

When set to 1, allows access to

the second phone number.

Bit not used (Bit C5).

Enter 0.

Auto Redial Disable (Bit C4).

When set to 1, the user cannot access the 6-

minute auto redial feature.

Speaker Disable (Bit C3).

This bit is used to disable internal handset

speaker when adding V.S.P. option. 1 = handset speaker disabled, 0 =

handset speaker enabled.

Bit not used (Bit C2).

Enter 0.

Selectable System Scan Disable (Bit C1).

When set to 1, the user cannot

select the primary system.

Diversity Antenna Enable (Bit C0).

(Extended systems only) 0 = Non-

diversity, 1 = Diversity.

12 0334

Initial Paging System.

There are 4 significant bits for the initial paging

channel. For system A enter 0333 and system B enter 0334.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 132 133

Comments to this Manuals

No comments

Motorola M3097 Service Manual Page 39

Comments to this Manuals

Related products and manuals for Mobile phones Motorola M3097