Motorola M12 Oncore User's Guide Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Chapter 3 – Receiver Description
Motorola GPS Products - Oncore User’s Guide
UT+ ONCORE RECEIVER TECHNICAL CHARACTERISTICS
Table 3.5: Oncore Technical Characteristics – UT Plus Model
Receiver Architecture 8 parallel channel
L1 1575.42 MHz
C/A code (1.023 MHz chip rate)
Code plus carrier tracking (carrier aided tracking)
General
Characteristics
Tracking Capability 8 simultaneous satellite vehicles
Dynamics Velocity: 1000 knots (515 m/s); > 1000 knots at altitudes < 60,000 ft.
Acceleration: 4g
Jerk: 5 m/s
3
Vibration: 7.7G per Military Standard 810E
Acquisition Time
(Time To First Fix, TTFF)
(Tested at –30 to +85ºC)
< 20 s typical TTFF-hot (with current almanac, position, time and
ephemeris)
< 50 s typical TTFF-warm (with current almanac, position, and time)
< 300 s typical TTFF-cold
< 1.0 s internal reacquisition (typical)
Positioning Accuracy 100 m 2dRMS with SA as per DoD specification
Less than 25 m SEP without SA
Timing Accuracy
(1 Pulse Per Second, 1 PPS)
Time RAIM algorithm
< 130 ns (1 sigma) with SA on
In position hold mode, < 50 ns (1 sigma) with SA on
Jamming Immunity Immune to the following CW Jamming signal levels measured at the input
to the Oncore Active Antenna when the receiver is in position-hold mode.
Values are typical.
-50 dBm @ 1570 MHz
-79 dBm @ 1575.42 MHz
-56 dBm @ 1580 MHz
Antenna Active micro strip patch antenna module
Powered by receiver module (5-80 mA @ 5 V)
Performance
Characteristics
Datum WGS-84
Serial
Communication
Output Messages Latitude, longitude, height, velocity, heading, time (Motorola binary
protocol)
Software selectable output rate (continuous or poll)
TTL interface (0 to 5 V)
Power Requirements
5 ± 0.25 V; 50 mVp-p ripple (max)
“Keep-Alive” BATT Power External 2.5 V to 5.25 V; 5 uA typical @ 2.5 V
Electrical
Characteristics
Power Consumption <0.9 W @ 5 V with active antenna drawing 20 mA
Dimensions 2.00 x 3.25 x 0.64 in. (50.8 x 82.6 x 16.3 mm)
Weight 1.8 oz (51g)
Connectors Data/power: 10 pin (2x5) unshrouded header on 0.100 in, centers
RF: right angle OSX (subminiature snap-on)
Physical
Characteristics
Antenna to Receiver
Interconnection
Single coaxial cable
Antenna sense circuit
Operating Temperature -40ºC to +85ºC
Humidity 95% noncondensing +30ºC to +60ºC
Environmental
Characteristics
Altitude 60,000 ft. (18 km) (max.)
> 60,000 ft. (18 km) for velocities < 1000 knots
Standard Features Time RAIM
100PPS output
Automatic site survey
Jamming protection)
Miscellaneous
Optional Features Lithium battery
Straight OSX RF connector
Revision 5.0 08/30/02
3.16
Page view 15
1 ... 15 16 17 ... 50

Comments to this Manuals

No comments