ISA DMA Channels
http://www.mcg.mot.com/literature 5-7
5
Notes:
1. Internally generated by the PIB.
2. After a reset, all ISA IRQ interrupt lines default to edge-sensitive
mode.
3. These PCI interrupts are routed to the ISA interrupts by
programming the PRIQ Route Control Registers in the PIB. The
PCI to ISA interrupt assignments in this table are suggested. Each
ISA IRQ to which a PCI interrupt is routed to MUST be
programmed for level-sensitive mode. Use this routing for PCI
interrupts only when the MPIC is either not present or not used.
4. The MPIC, when present, should be used for these interrupts.
ISA DMA Channels
The MVME2400 series does not implement any ISA DMA channels.
Comments to this Manuals