Motorola 2247-N8 Specifications download pdf (Page 74)

Administrator’s Handbook

set management web http-port [ 1 - 65534 ]

Specifies the port number for HTTP (web) communication with the Motorola Netopia® Gateway. Because port

numbers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when

assigning new port numbers to the Motorola Netopia® Gateway web configuration interface. A setting of 0 (zero)

will turn the server off.

set management web idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for HTTP access to the Gateway, after which a user must re-login to the

Gateway. Default is 5 minutes for HTTP.

☛ NOTE:

You cannot specify a port setting of 0 (zero) for both the web and telnet ports at the same time. This

would prevent you from accessing the Gateway.

Physical interfaces commands

set physical dsl enable [ off | on ]

Turns the physical DSL interface off or on. Default is on.

set physical dsl loopback [ off | on ]

Turns the DSL loopback mode off or on. Default is off.

set physical dsl modulation auto [ off | on ]

Turns automatic DSL modulation off or on. Default is on.

set physical dsl profile-8a [ off | on ]

Default is on.

set physical dsl profile-8b [ off | on ]

Default is on.

set physical dsl profile-8c [ off | on ]

Default is on.

set physical dsl profile-8d [ off | on ]

Default is on.

set physical dsl profile-12a [ off | on ]

Default is on.

1 ... 73 74 75 ... 108

No comments

Motorola 2247-N8 Specifications Page 74